102
Do not use the heating mode if the seats are not occupied by
passengers or there are any items such as a special baby seat,
bag, etc. This may cause a malfunction of the heating elements
of the seat heating system. It is recommended that the switches of
the heating system be turned on only when the engine is started.
It signicantly saves the accumulator battery capacity.
If the voltage drops in the electrical on-board system of the
motor vehicle, the seat heating is automatically switched off to
provide sufcient power for the engine control system.
If you or a passenger suffer from low pain or temperature
threshold, e.g. as a result of drug treatment, paralysis or chronic
disease, it is recommended that you do not use the heater. It may
result in burns on the back, buttocks and legs. If you still want to
use the seat heating, it is recommend that you turn on the heating
for short periods of time.
Do not use additional pillows between the seat and the pas-
senger or the driver.
It is forbidden to place foreign objects under the driver’s seat
and in the area of his feet.
Changing of the headrest height or its removal is performed
by moving the headrest in a vertical direction:
– up — by arm force (to the uppermost position);
– down — when the button of the headrest lock is switched on.
Removal is performed by moving the headrest upward from the
uppermost position while pressing the button of the headrest lock.
Adjustment of the front seats in the longitudinal direction is
performed by lever 1 (Fig. 3.32): pull the lever located under the
seat cushion which blocks the longitudinal movement of the seat
and move the seat to the desired position. When the adjustment is
nished, release the lever and make sure that the seat is securely
xed by moving it back and forth when the lever is released.
Backrest angle is controlled (stepless adjustment) by turning
handle 3 at the base of the backrest.
To Next Page
Loading...
