4
Important Notes
The DSD 5000 User Manual is the subject of intellectual property rights, including
copyright, under domestic law and international conventions.
All rights are reserved. The DSD 5000 User Manual supplements the information supplied
with the packaging of the STB as well as the detailed information available on our website.
Due to software upgrades, the features and functionalities in this User Manual may differ
from those on your STB.
https://uec.com.au/downloads/product-manuals for the latest User Manual.
Please Note: The Network Operator requires the use of a 10.7 GHz (10700) LNB to
receive all available TV services.
This STB carries the RCM logo and is compliant with Electricity (Consumer Safety) Regulation
2015; Radio communications (Electromagnetic Compatibility) Standard 2008.
Abbreviations & terms
NAS
NAS Australia (importer, distributor and service authority).
VAST
TM
Viewer Access Satellite Television.
STB
DSD 5000 Set Top Box.
PSU
Power Supply Unit, also Power Pack (Manufacturer supplied 12VDC
Accessory).
RCU
Remote Control Unit.
EPG
Electronic Program Guide (GUIDE Button on the RCU).
LNB
Low Noise Block (fitted to the satellite dish).
IR
Infra Red.
SW
Software.
Boot
Full start-up of the STB from power cycle or factory reset.
Antenna
Any general reference to antenna shall be taken to include both satellite
dish antenna and LNB (which work in combination).
AV
Audio Visual – on the STB refers to Video/L/R sockets on rear.
Event
A recording, reminder or other programmed action.
!
!
To Next Page
Loading...