Uniden BCD436HP Owner's Manual

7
100 Quick Keys – You can scan Favorites Lists and Systems by assigning them to quick keys.
Search Avoids – You can temporarily Avoid up to 250 frequencies and permanently Avoid up to
250 frequencies in any Search mode or Close Call mode.
10 Custom Searches – Lets you program up to 10 custom search ranges.
Search with Scan Operation – Lets you include Custom Search ranges during scan operation.
3 Search Keys – You can assign 3 of the number keys to start a Custom Search, Tone-Out
Search, or Close Call Search.
Quick Search – Lets you enter a frequency and start searching.
SAME Weather Alert/Priority – Lets your scanner alert you when a SAME weather alert is
transmitted on a NOAA weather channel. You can also set a weather channel as a priority
channel.
Built-in Battery Charger (BCD436HP only) – Allows you to charge the batteries in the scanner.
DIN-E and ISO Vehicle Mountable (BCD536HP Only) – Using the optional DIN-E sleeve or a
standard ISO technique, the scanner can be easily mounted in most vehicles.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz