68
Direct Frequency Entry
Press Channel to hold on any frequency. Enter the frequency and press Channel. Press
Channel to release hold.
Frequency Intermediate Exchange
Press Channel to hold on any frequency. Press Func then 7(IFX) to toggle on or off.
Repeater Frequency
Press Channel to hold on any frequency.
Press Func then press and hold 8(REV).
Replay the Last Transmissions
While searching, press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording
While searching, press Func then Replay.
Note: Resets to Off when you turn off the scanner.
Storing Frequencies
Displayed Frequency into a Quick Save Department – Press E/yes.
You will see Quick Frequency Save in the display then press E/yes.
The scanner stores the frequency into the Quick Save Department in the Quick Save
System.
Displayed Frequency into an Existing Department – Press E/yes.
You will see Saving to Quick Dept in the display then press ./no.
At Saving Channel to scroll to the Favorites List and press E/yes.
At Select System scroll to the System and press E/yes.
At Select Department scroll to the and press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete the
settings for the new channel.
If you don’t want to edit the channel settings or are done editing the channel, press
Avoid to return to searching.
Search Menu
Press Func then Menu.
Close Call Modes
To toggle CC Off, CC Pri, or CC DND:
(BCD536HP) Press SQ(
).
(BCD436HP) Press Func then Avoid(
).
Weather Alert Priority Mode
Press Channel to hold on any channel.
Press Func then 6(WX) to toggle on or off.
To Next Page
Loading...
Need help?
General
