22
COMMON CONTROLS (BCD436HP and BCD536HP)
System • Press Func then System to start Scan mode.
• Press to enter System Pause for 2 seconds then hold on a System in
Scan mode.
• Double-press System for hold without pause in Scan mode.
• Double-press to release System Hold.
• Press to enter Search Pause mode
for 2 seconds then hold on a Search
in Search mode.
• Double-press for Search Hold without pause in Search mode.
• Press to release Search Hold.
Department • Press to enter Department, pause for 2 seconds, and then hold on a
Department in Scan mode.
• Double-press Department for hold without pause in Scan mode.
• Double-press to release Department Hold.
• Press to enter Search Pause mode for 2 seconds then hold on a Search
in Search mode.
• Double-press for Search Hold without pause in Search mode.
• Press to release Search Hold.
• Press Func then Department to hold/release Site in Scan mode.
Channel • Press to hold/release a Channel, Frequency, CC hit, Tone-Out.
• Press Func then Channel to toggle Modulation for Channel, Site, or
Search, in Hold modes.
• Press to pause in Replay mode.
Menu • Press to enter Menu mode.
• Press to return one level in Menu mode.
• Press Func then Menu for Search menu in Search mode.
• Press Func then Menu for Close Call menu in Close Call mode.
• Press Func then Menu for Weather menu in Weather Scan.
• Press Func then Menu for Tone-Out menu in Tone-Out.
Replay/Record • Press to Replay the last transmissions.
• Press Func then Replay to start/stop recording
• Press and hold to Review Recordings.
To Next Page
Loading...
Need help?
General
