Uniden BCD436HP Owner's Manual

67
CUSTOM SEARCH
Allows you to search the scanners 10 programmed frequency ranges.
See also Edit Custom Search.
Press Menu. Scroll to Search for... and press E/yes.
Scroll to Custom Search and press E/yes.
See also Set Search Key.
Change Direction or Resume Search
Turn the Scroll Control.
Select Custom Search Bands
Press the number keys to enable or disable each Custom Search band.
Holding
Frequency Hold. Press Channel to hold on a Frequency.
Scroll to frequencies. Press Channel to release hold.
Avoiding Frequencies
Temporary Avoids cancel when you cycle power.
Frequency Avoid - Press Avoid once to Temporary Avoid.
Press quickly to toggle Permanent Avoid and Stop Avoiding when the the scanner
stays in a frequency or in Search Hold mode.
Review Avoids - Press Channel to hold on any Frequency.
Press Func then Avoid. Scroll to each frequency and press E/yes to Stop Avoiding.
Temporary Avoids appear reversed -
T
.
Stop All Avoiding - Press Channel to hold on any Frequency.
Press and hold Avoid. The scanner displays Search Frequencies All Unavoided.
See also Freq Avoids.
Attenuation
Band Attenuation. Press Func then 4(ATT) for each band.
Global Attenuation. Press Channel to hold on any frequency then press and hold Func
then 4(ATT) to toggle global attenuation.
Modulation
Press Func then Channel(MOD) for each band.
Range number
currently being
searched
Search range
name
Searching
Direction

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz