Uniden BCD436HP Owner's Manual

57
DIRECT FREQUENCY/TGID ENTRY
Press Channel to hold on any Channel.
Enter the Frequency/TGID and press E/yes. Press Channel to release hold.
USING NUMBER TAGS
If two Favorites Lists have the same number tag, they will be selected in sequence. The rst time
you select the number tag, the scanner will go to the rst Favorites List assigned to that number
tag; if you select the same number tag again, it will go to the 2nd Favorites List assigned to that
number tag, and so on. The same rule applies to System and Channel number tags.
View Number Tags
BCD436HP - Number Tag is always displayed in Scan Hold mode.
BCD536HP - Press Func in Scan Hold mode..
Go To Number Tag
Press Channel to hold on any channel.
Enter the Favorites number tag, ./no, then the System number tag, ./no, then the
Channel number tag and press Channel.
Examples:
1.01.36 to go to Channel 36 in System 01 in Favorites List 1.
.01.36 to go to Channel 36 in System 01 in current Favorites List.
..36 to go to Channel 36 in current System.
CLOSE CALL MODES
To toggle CC Off, CC DND, or CC Pri:
(BCD536HP) Press SQ (
).
Favorite Number
Tag
System Number
Tag
Channel Number
Tag
System
Number Tag
Favorite
Number Tag
Channel
Number Tag

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz