Uniden BCD436HP Owner's Manual

65
Manual. Allows you to manually set the threshold in threshold setting mode or using the
P25 Threshold Level setting.
Default. Sets the scanner to the default threshold of 8, Auto.
P25 Threshold Level – The default setting is 8.
0 to 20
SEARCH OPTIONS
Press Menu. Scroll to Search for... and press E/yes.
Scroll to the options below and press E/yes.
Custom Search Set Search Key
Edit Custom Search with Scan
IMPORTANT! There are many options and setting in Search/Close Call Options that affect
and compliment the settings for searching. Please review those rst.
EDIT CUSTOM
You can edit the 10 Custom Search ranges. The default custom search range names appear as
Custom 1, Custom 2, and so on.
Custom 0-9. Select for each Custom Search.
Edit Name. See Data Naming.
Edit Srch Limit
Set Lower Limit. Enter the lower limit.
Set Upper Limit. Enter the upper limit.
Set Delay Time
-10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec.
Set Modulation
Auto, AM, NFM, FM, WFM, or FMB (Broadcast)
Set Attenuator
On or Off
Set Step
Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz
Set Audio AGC
Analog - Press E/yes to toggle On or Off.
Digital - Press E/yes to toggle On or Off.
P25 Waiting Time
0 to 1000 ms
P25 Threshold Mode
Auto, Manual, Default
P25 Threshold Level
0 to 20
Search with Scan. See also Select Lists to Monitor and Search with Scan.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz