Uniden BCD436HP Owner's Manual

52
Scanning Checklist:
1. You must enable at least one Favorites List or the Full Database in Select Lists to Monitor.
2. Favorites Lists or Systems, with Quick Keys assigned to them, must be enabled with quick
keys or through Manage Quick Key Status.
3. Service Types required for channels must be set to On.
Any Favorites List not assigned to a quick key, not Avoided, and set to On in Select – to Monitor
will be scanned.
Any System not assigned to a quick key and not Avoided, will be scanned.
Scanning
Direction
System
Name
Favorites List Name
Time
and
Date
Quick Key for
Favorites List
Quick Key for
System
Department Name
Scan Mode
Channel
Name
Function Tag Frequency CTCSS/DCS/NAC
Signal Strength
Scan Receive
System Hold Site Hold
Unit ID Display - Channel Hold Search with Scan - Frequency Hold
Change Direction or Resume Scan Turn the Scroll Control.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz