98 Making calls
Ignoring the second call
Prerequisite: You are conducting a call and call waiting is allowed
(ïƒ page 213).
Press the Softkey.
The caller still hears the on-hook signal. You can subsequently Answer, Reject
or Deflect the second call via Conversations. You administrator must have al-
lowed for a corresponding wait time for this in the system so that the call is not
terminated prematurely or forwarded.
While the ignored second call continues to wait, from the active call you can:
• initiate a consultation call
• initiate a conference
• toggle between the consultation call and your call partner
• transfer a call
A third call would be rejected with the busy signal. If you have disconnected the
first call, the ignored second call rings like a normal call.
Rejecting a second call
Prerequisite: You are conducting a call and call waiting is allowed
(ïƒ page 213).
Press the Softkey.
The second call is rejected. The caller hears the busy signal. The call is indicat-
ed as "missed" in Conversations.
Deflecting a second call
Prerequisite: You are conducting a call and call waiting is allowed
(ïƒ page 213).
Press the Softkey.
j Enter the phone number and confirm. You can also select and call the relevant
subscriber from Conversations at this point.
The second call is deflected to the destination specified.
Connecting parties
Prerequisite: You have answered the second call.
Press the Softkey. The other two parties are now connected to one another. You
can now hang up or dial another number for instance.
or Connecting by hanging up
Prerequisite: Connecting by hanging up is activated (consult your administra-
tor) and "Toggle associate" must be enabled (ïƒ page 214).
] or É Replace the handset or, if you are in speakerphone mode, press the loudspeak-
er key. The other two parties are now connected to one another.
Ignore
H
_
Reject
Ã
_
Deflect
Ô
_
Complete transfer
D
_
To Next Page
Loading...
Need help?
General