Unify OpenScape 4000 User Manual

128 Using Bluetooth
€ Select the relevant Bluetooth device.
Confirm with the Softkey to connect. You will receive a corresponding confirma-
tion. It often suffices to switch on the Bluetooth device in order to establish the
connection automatically.
or
Confirm with the Softkey to disconnect. You will receive a corresponding confir-
mation. The connection is dropped automatically if you switch off the Bluetooth
device.
^' Exit the menu using the back space key.
Connecting/disconnecting a Bluetooth device automatically
If your Bluetooth device is proximity-system enabled, Proximity Monitoring is ac-
tivated by default. This means that when the paired device comes into the im-
mediate vicinity of the OpenScape CP700/700X, the connection is established
automatically. If the device is removed from the vicinity, the connection is
dropped automatically. The default setting is for Proximity Monitoring to be en-
abled but you can disable it at any time.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Paired devices are displayed.
€ Select the relevant Bluetooth device.
« And open it. The status of the device is displayed and activated, for example,
with "(aud)".
Open the Configuration menu with the Softkey.
€ Select the "Proximity Monitoring" function.
Deactivate with the Softkey.
You receive a message that the OpenScape CP700/700X is now visible
for other Bluetooth devices while you are in this menu.
? Headset
- Ž
¦_
?
Headset
- Š
¢_
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
You receive a message that the OpenScape CP700/700X is now visible
for other Bluetooth devices while you are in this menu.
?
Headset
-Šš
¢_
Configure
U
_
Proximity Monitoring
¢_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English