Unify OpenScape 4000 User Manual

130 Using Bluetooth
€ Select the relevant Bluetooth device.
« And open it. The status of the device is displayed and activated, for example,
with "pxp" for "Proximity Monitoring".
Open the Configuration menu with the Softkey.
€ Select the "Audio" function.
Deactivate with the Softkey.
Save the setting by selecting the Softkey. The icon
Ž for the device name was
removed.
Deleting a Bluetooth device from the list
You can delete a single Bluetooth device from the list, for example, if it will be no
longer in the vicinity for an indefinite period.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey. You receive a message that the OpenScape CP700/
700X is now visible for other devices in the vicinity as long as the menu is open.
Paired devices are displayed.
€ Select the relevant Bluetooth device.
« And open it.
Select deletion with the Softkey.
Confirm deletion with the Softkey.
Renaming a Bluetooth device in the list
A Bluetooth device is entered in the list with the name set in the device. This is
often the device type. You can change this name.
@ Press the key for the Main menu if needed.
Open using the Softkey.
Open using the Softkey.
Configure
U
_
Use for phone audio
¢_
Q
_
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
?
Headset
- Ž
¦_
Remove
Ö
_
Remove
Ö
_
Settings
_
$
User settings
-
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English