Unify OpenScape 4000 - Page 163

Making calls in the team 161
You can activate and deactivate the set delay time for all line keys using a func-
tion key  page 144.
Entering a number for the hot and warm line function
Specify which number should be dialed when the hot or warm line function is ac-
tivated.
z You can also configure this setting via the Web interface  page 238.
@ Press the key for theMain menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
Select the required line (e.g. primary line) and open using the Softkey.
Open using the Softkey
1
.
The input field is open.
j Enter or change the destination and confirm.
Save the setting by selecting the Softkey. The destination phone number is dis-
played.
Settings
_
$
User settings
-
_
$
Configuration
-
_
$
Keyset
-
_
Lines
-
_
Primary line
-
_
Hot/warm dest.
K
_
1. The phone displays the current setting
©
3339
Q
_
Q
_