Unipulse F159 - Initial Data

8.SETTING VALUES LIST
96
Initial Data
m= D20000 + Unit NO. × 100
DM Area
Address
Name
Initial
Value
Refer
to:
m+20 Comparison inhibit time 050 P. 82
m+21 Compare time 150 P. 82
m+22 Complete output time 300 P. 82
m+23 Auto jog timer 100 P. 83
m+24 AZ times / Judging times 0101 P. 83
m+25 , m+26 FF CPS. regulation 09800 P. 75
m+27 Weighing function 1 0000 P. 31
m+28 Weighing function 2 0000 P. 32
m+29 Weighing function 3 0141 P. 33
m+30 Output selection 12 P. 34
m+31
Restriction on the
tare subtraction function
0000 P. 34
m+32 Sequence mode 0000 P. 35
m+33 Motion detection 1505 P. 52
m+34 Zero tracking (Period) 00 P. 54
m+35 Zero tracking (Range) 0000 P. 54
m+36 Filter 2064 P. 50
m+37 Stable mode 11 P. 36
m+38 Function selection 21 P. 36
m+39 , m+40 Balance weight value 10000 P. 40
m+41 , m+42 Capacity 10000 P. 40
m+43 Minimum scale division 001 P. 41
m+44 , m+45 Net Over 99999 P. 87
m+46 , m+47 Gross Over 99999 P. 87
m+48 , m+49 DZ regulation value 00200 P. 55
m+50
Gravitational acceleration
(Area Number Input)
0009 P. 41
m+51
Gravitational acceleration
(Acceleration Input)
9798 P. 41
m+52 - m+99 Undefined