Arrow Manual Console Recall Plug-In 195
Loading Synchronized DAW Projects
If SYNC was enabled when a DAW project containing Console Recall was saved, then
loading that DAW project sends the Console settings saved in the plug-in to Console. If
the current Console settings are different than the Console settings in the DAW plug-in,
the Console settings that were active before the DAW project was loaded are overwritten.
Note: The Console settings that were active before the DAW project was loaded
can be easily recovered if desired using the Cached Sessions feature in the
Sessions Menu within the Console Application.
If SYNC was disabled when a DAW project file containing Console Recall was saved, then
loading that project will not change the Console settings that were active before the DAW
project was loaded.
Session State Parameter
The Console Recall plug-in has a parameter called “Session State” that is exposed for
DAW automation but is not in the plug-in interface. Session State ensures all changes
to Console settings and the DAW session are captured by the Console Recall plug-in. If
something related to Session State appears in the DAW, it’s best to just ignore it.
Important: To ensure proper functionality when SYNC is enabled in Console
Recall, do not create or edit DAW automations with the Session State parameter.
To Next Page
Loading...
Need help?
General
