Arrow Manual Console Reference 96
Global View Column Controls
Several controls appear in all View Columns. These controls (detailed below) have
identical functionality in all Views.
Menu Switch
The MENU switch is located at the top of the View Column. Clicking the
switch reveals the Application Menus, where various Console functions can
be accessed.
Default Switch
When Option Latch is active with the parameters DEFAULT switch,
clicking any control returns the parameter to its default value.
Note: The DEFAULT function is primarily for knob and fader values. It
does not apply to any preamp settings, plug-in inserts, SOLO/MUTE
switches, monitor levels, customized input names, and similar functions.
Clear Switches
The CLEAR switches are located near the bottom of all View columns.
CLEAR CLIPS
This switch clears all clip indicators and peak hold indicators on all
meters.
Tip: Clip and peak hold indicators can be individually cleared by clicking any
individual meter.
CLEAR SOLO
Whenever SOLO is engaged on any channel input, the CLEAR SOLO switch flashes
yellow. Clicking the Clear Solo switch deactivates the Solo function of any/all channel
inputs.
Tip: Click Clear Solo again to return all channels to their previous Solo states.
Settings Switch
The SETTINGS switch is located at the bottom of all View columns. It
opens the Console Settings window, where many global functions are
defined. For complete details, see Console Settings.
To Next Page
Loading...
Need help?
General
