Universal Robots E Series Installation Guide

•
Ejector Back: Enables the movement of the ejector to its back position.
•
Ejector Forward: Enables the movement of the ejector to remove an item from the mold.
Should be used when the robot is in position ready for grasping the item.
e-Series Injection Molding Machine
Interface (IMMI)
20 Installation Guide
8.IMMI module programming
Copyright © 2019–2021 by UniversalRobotsA/S. All rights reserved.

Universal Robots E Series Specifications

General

Brand	Universal Robots
Model	E Series
Category	Robotics
Language	English