Universal Robots E Series Installation Guide

•
Core Pullers In: Enables the movement of the core pullers to position 1. The core pullers used
are selected from the drop down menu.
•
Core Pullers Out: Enables the movement of the core pullers to position 2. The core pullers
used are elected from the drop down menu.
Installation Guide 21
e-Series Injection Molding Machine
Interface (IMMI)
8.IMMI module programming
Copyright © 2019–2021 by UniversalRobotsA/S. All rights reserved.

Universal Robots E Series Specifications

General

Brand	Universal Robots
Model	E Series
Category	Robotics
Language	English