9. Certificates
This section contains information about certificates and declarations valid for UniversalRobots
e-Series robots with OEM controllers.
This document contains the following certificates and declarations:
l 9.4. EU Declaration of Incorporation.
l 9.5. China RoHS.
9.1. Shipping Materials
As stated by our suppliers, UniversalRobots e-Series robots shipping materials comply with the
ISPM-15 requirements for producing wood packaging material and are marked accordingly.
9.2. Certification of Quality
UniversalRobots e-Series robots undergo continuous internal testing and end-of-line test
procedures. UR testing processes undergo continuous review and improvement.
9.3. Declarations According to EU directives
UniversalRobots robots are certified according to the following directives.
l 2006/42/EC – Machinery Directive (MD)
According to the Machinery Directive 2006/42/EC, UniversalRobots e-Series robots are
partly completed machinery, and do not have a CE mark on them.
The declaration of incorporation according to 2006/42/EC annex II 1.B. is in section 9.4. EU
Declaration of Incorporation.
l 2011/65/EU – Restriction of the use of certain Hazardous Substances (RoHS)
See section 9.5. China RoHS.
l 2012/19/EU – Waste of Electrical and Electronic Equipment (WEEE)
For information on disposal of electrical and electronic equipment waste, refer to
chapter7, Disposal and Environment in the robot user manual.
Installation Guide 21 OEM Control Box
9. Certificates
Copyright © 2019 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
