9.4. EU Declaration of Incorporation
Universal Robots A/S, Energivej 25, DK-5260 Odense S, Denmark
info@universal-robots.com
EU Declaration of Incorporation (in accordance with ISO/IEC 17050-1:2010) Original EN
Person in the Community Authorized to Compile the Technical File:
Universal Robots A/S, Energivej 25, DK-5260 Odense S
Description and Identification of the Partially-Completed Machine(s):
Product and
Function:
Industrial robot (multi-axis manipulator with AC or DC powered OEM controller)
Function is determined by the completed machine (with end-effector and intended use).
Model:
e-Series robots with either AC or DC OEM controllers:
UR3e OEM AC, UR5e OEM AC, UR10e OEM AC
UR3e OEM DC, UR5e OEM DC, UR10e OEM DC
Serial Number: Starting 2019 5 0 00000 and higher Effective 5 August 2019
Incorporation:
Universal Robots e-Series OEM robots (UR3e, UR5e, and UR10e) shall only be put into
service upon being integrated into a final complete machine (robot system, cell or
application), which conforms with the provisions of the Machinery Directive and other
applicable Directives.
It is declared that the above products, for what is supplied, fulfil the following directives as detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible for determining that
completed machine fulfils all applicable Directives and update the harmonized and other standards.
I. Machinery Directive
2006/42/EC
The following essential requirements have been fulfilled:
1.1.2, 1.1.3, 1.1.5, 1.2.6, 1.3.4, 1.3.8.1, 1.5.2, 1.5.10, 1.7.2, 1.7.4, 4.1.2.3
It is declared that the relevant technical documentation has been compiled
in accordance with Part B of Annex VII of the Machinery Directive.
II. Low-voltage Directive 2014/35/EU
Reference the Low-voltage Directive.
III. EMC Directive 2014/30/EU
Reference the EMC Directive.
IV. RoHS Directive 2011/65/EU
V. WEEE Directive 2012/19/EU
Reference the RoHS Directive 2011/65/EU.
Reference the WEEE Directive 2012/19/EU
Reference the Harmonized Standards Used, as Referred to in Article 7(2) of the MD & LV Directives and
Article 6 of the EMC Directive:
(I) EN ISO 13732-1:2008, as applicable
(II) EN 60204-1:2006/ A1:2010,
as applicable
(II) EN 60320-1:2001/ A1:2007
(II) EN 61140:2002/ A1:2006
Reference to Other Technical Standards and Specifications Used:
(I) ISO 9409-1:2004
(II) EN 60664-1:2007
(II) IEC 60664-5:2007
(II) IEC 61784-3:2010 [SIL2]
ISO 14664-1:2015 [Class 5 for UR3e,
UR5e and UR10e manipulators (not
controllers)]
The manufacturer, or his authorised representative, shall transmit relevant information about the partly completed
machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas, certificate #DK008850.
Odense Denmark, 13 August 2019
Name: Roberta Nelson Shea
3 = UR3e, 5 = UR5e, 0 = UR10e
Sequential numbering, restarting at 0 each year
OEM Control Box 22 Installation Guide
9. Certificates
Copyright © 2019 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
