Universal Robots UR5e - Tool Power Supply

EU Declaration of Incorporation in accordance with ISO/IEC 17050-1:2010 (original EN)
Description and
Identification of the
Partially-Completed
Machine(s):
Product and Function:
Industrial robot (multi-axis manipulator with control box and Teach
Pendant).
Function is determined by the completed machine (with end-effector
and intended use).
Model UR3e, UR5e, UR10e,UR16e (e-Series).
Note:This Declaration of Incorporation is NOT applicable when the
UROEMController is used.
Serial Number Starting 20235000000 and higher
year
e-Series
3=UR3e,5=UR5e,3=UR3e,0=UR10,6=UR16e
sequential numbering,
restarting at 0 each year
Incorporation: Universal Robots e-Series (UR3e, UR5e, UR10e and UR16e) shall
only be put into service upon being integrated into a final complete
machine (robot system, cell or application), which conforms with the
provisions of the Machinery Directive and other applicable Directives.
It is declared the above products fulfil, for what is supplied, the following Directives as
detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible for
determining that completed machine fulfils all applicable Directives and update the harmonized and other
standards.
The following essential requirements of the EU Machinery Directive have been fulfilled:
IMachine Directive
2006/42/EC
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2,
1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3
It is declared the relevant technical documentation has been
compiled in accordance with Part B of Annex VII of the Machinery
Directive.
IILow-voltage Directive
2014/35/EU
Reference the LVD and the harmonized standards used below.
IIIEMC Directive 2014/30/EU Reference the EMC Directive and the harmonized standards used
below.
Reference the harmonized
standards used,
referred to in Article 7(2) of the
MD and LV Directives
and Article 6 of the EMC
Directive:
(I) EN ISO 10218-1:2011
TÜV Nord Certificate #44 708 14097607
(I) EN ISO 13849-1:2015
TÜV Nord Certificate #44 207 14097610
(I) EN ISO 13732-1:2008, (I) EN ISO 13849-2:2012,
(I) EN ISO 13850:2015, (I) EN ISO 1037:1995+A1:2008
(II) EN 60204-1:2006/ A1:2010, (II) EN 60320-1:2001/ A1:2007
(II) EN 60529:1991/ A2:2013, (II) EN 60947-5-5:1997/ A11:2013
(II) EN 61131-2:2007, (II) EN 61140:2002/ A1:2006
(III) EN 61000-3-2:2014, (III) EN 61000-3-2:2013
(III) EN 61000-6-1:2007, (III) EN 61000-6-2:2005
(III) EN 61000-6-3:2007+A1, (III) EN 61000-6-4:2007/ A1:2011
(III) EN 61326-3-1:2008
Industrial locations SIL 2
User Manual UR5e
Copyright © 2009–2023 by UniversalRobotsA/S. All rights reserved.