It is declared the above products fulfil, for what is supplied, the following Directives as
detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible for
determining that completed machine fulfils all applicable Directives and update the harmonized and other
standards.
Reference to other technical
standards and specifications
used:
(I) ISO 9409-1:2004 [Type 50-4-M6], (I) ISO/TS 15066
as applicable
,
(I) EN 60947-5-8:2020
(II) EN 60664-1:2007, (II) EN 60664-5:2007, (II) IEC 61784-3:2010
[SIL2]
(III) IEC 60068-2-1: 2007, (III) IEC 60068-2-2:2007
(III) IEC 60068-2-27:2008, (III) IEC 60068-2-64:2008
(III) IEC 61326-3-1:2008
ISO 14664-1:2015
[Fraunhofer Certificate #UN 2301-1381]
The manufacturer, or his authorised representative, shall transmit relevant information about the
partly completed machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas,
certificate #DK013489.
2.11. Warranty
2.11.1. Product Warranty
Direct your warranty inquiries to product related information on myUR
2.11.2. User Manual Disclaimer
UniversalRobotsA/S continues to improve the reliability and performance of its products, and as
such reserves the right to upgrade products, and product documentation, without prior warning.
UniversalRobotsA/S takes every care to ensure the contents of the User Manual/s are precise and
correct, but takes no responsibility for any errors or missing information.
UR5e User Manual
Copyright © 2009–2023 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
