Universal Robots UR5e - File Manager

Save... Save... proposes three options. Depending on the program/installation you
load-create, you can:
•
Save All to save the current Program and Installation immediately,
without the system prompting to save to a different location or
different name. If no changes are made to the Program or
Installation, the Save All... button appears deactivated.
•
Save Program As... to change the new Program name and location.
The current Installation is also saved, with the existing name and
location.
•
Save Installation As... to change the new Installation name and
location. The current Program is saved, with the existing name and
location.
User Manual 332 UR5e
Copyright © 2009–2023 by UniversalRobotsA/S. All rights reserved.