V-TEK PT-55 - Page 64

54 PT-55 User’s Guide
Configuring & Running a Peel Test D291308.7M.fm
2. Complete the Customer/Machine Data fields for Name, Part Number, Reel Number, Name/
Shift, and the Temperature, Pressure, and Dwell Time used to create the seal being tested.
3. Enter carrier tape information in the Carrier fields for Supplier, Type, and Lot Number.
4. Type in the Sealtape fields for Supplier, Type, and Lot Number.
Figure 3.30
Figure 3.31
Figure 3.32