Vaisala DMP248 - Technical specifications

APPENDIX 1 SERIAL COMMANDS__________________________________________________________
VAISALA _________________________________________________________________________ 99
TIME Setting the time
TIME <cr>
For example, to enter a new time:
>TIME <cr>
Current time is 01:35:54
Enter new time (hh:mm:ss) : 13:25:56 <cr>
When the current time is asked, the new time is passed with <cr>.
VERS Name and version of the programme
VERS <cr>
For example:
>VERS <cr>
DMP248 / x.yy
where x.yy is the programme version.
? Outputting the transmitter settings
? <cr>
For example:
>? <CR>
DMP248 / 1.01
CPU serial nr : A1234567
Keyboard type : 0
Address : 0
Output units : metric
Baud P D S : 4800 E 7 1 FDX
Serial mode : STOP
Output intrv. : 0 s
Mtim : 32
Pressure (hPa): 1013.25
Analog outputs
Ch1 0.00 ... 20.00 mA
Ch2 0.00 ... 20.00 mA
Ch1 ( Td ) lo -40.00 'C
Ch1 ( Td ) hi 100.00 'C
Ch2 ( T ) lo -40.00 'C
Ch2 ( T ) hi 160.00 'C
PRB serial nr : 9619
PRB cal. date : 960611
>