Vaisala DMP248 - Setting the Date; Setting the Time

CHAPTER 5________________________________________________________________ COMMANDS
VAISALA _________________________________________________________________________ 45
• If the pressure needs to be changed, press CL; enter the new
pressure with the arrow keys
NOTE
The pressure compensation takes place only with the security lock
jumper connected. If the security lock jumper is not connected, the
pressure compensation is performed with the value 1013.25 hPa.
Setting the date
• Select More in the main menu; select Date in the More menu:
• If the date is correct, acknowledge it by pressing ENT; this takes
the programme back to the More menu.
• If the date needs to be changed, press CL.
− first the centuries (19) start flashing; use the arrow keys to
change them and press ENT
− the years (92) start flashing; use the arrow keys to change them
and press ENT
− the months (06) start flashing; use the arrow keys to change
them and press ENT
− the days (17) start flashing; use the arrow keys to change them
and press ENT
Setting the time
• Select More in the main menu; select Time in the More menu:
• If the time is correct, acknowledge it by pressing ENT; this takes
the programme back to the More menu.
• If the time needs to be changed, press CL.