APPENDIX 2 ________________________________________________________________________
VAISALA ________________________________________________________________________ 103
Peel the correct power supply voltage from the sticker enclosed in the
power supply module package and attach it on the instrument label to
indicate that the supply voltage has been changed.
WARNING
Do not detach the power supply module from the transmitter when
the power is on.
WARNING
Do not connect the power supply to mains when it is not installed in a
DMP248 transmitter.
Technical specifications
Operating voltage 115 VAC (93...127 V)
230 VAC (187...253 V)
Connections screw terminals for 0.5...
2.5 mm
2
wire (AWG 20...14)
Bushing for 7...12 mm diameter cable
Indicator PWR ON LED on power
supply module board
Operating temperature range -40...+45 °C
Storage temperature range -40...+70 °C
To Next Page
Loading...
