Vaisala DMP248 - Page 12

OPERATING MANUAL _______________________________________________________________
8 _____________________________________________________________________M210492EN-A
ø6.5
CL ENT
133
145
104
120
65
FIGURE 3-1 Dimensions of the DMP248 electronics housing (in
mm).
NOTE
1. Always mount the transmitter housing with the cable bushings
pointing downwards to ensure IP65 (NEMA4) rating
2. Make sure that the connection cable has the right thickness
(∅7...10 mm) and that the cable bushing is carefully tightened.
3. Pay always special attention to closing the transmitter cover
carefully and remember to tighten all four screws.
PROBE UP
PROBE
PUSHED
DOWN
cable length
2, 5 or 10 m
ø5.5
178
31
ø13.5
adjustment
range120 mm
29
R1/2 ISO 7/1
non leaking screw (A)
(factory setting)
or leak screw (B)
(included in the package)
149
clasp nut
fitting body
FIGURE 3-2 Probe dimensions (in mm).