Vaisala DMP248 - Page 132

APPENDIX 5_________________________________________________________________________
128____________________________________________________________________M210492EN-A
The LEDs display these error types as follows:
¡¡¤¤ no frequency at all
¡¡¤¡ a frequency missing from the RH
channel
¡¡¡¤ a frequency missing from the T
channel
The second error type indicates erroneous y-values (used in internal
calculations):
Display: Serial bus:
E51 T y-value out of range
E53 U1 y-value out of range
The LEDs display these error types as follows:
¤¡¡¡ RH channel y-value out of range
¡¤¡¡ T channel y-value out of range