VAMP 259 - External I;O (Modbus RTU Master); Iec 61850

Technical description
6 Communication
6.2 Communication protocols
VM259.EN007
VAMP 24h support phone +358 (0)20 753 3264
233
6.2.8. External I/O (Modbus RTU master)
External Modbus I/O devices can be connected to the device
using this protocol. (See chapter 8.6.2 for more information).
6.2.9. IEC 61850
The relay supports communication using IEC 61850 protocol
with native implementation. IEC 61850 protocol is available
with the optional inbuilt Ethernet port. The protocol can be
used to read / write static data from the relay or to receive
events and to receive / send GOOSE messages to other relays.
IEC 61850 serve interface is capable of:
 Configurable data model: selection of logical nodes
corresponding to active application functions
 Configurable pre-defined data sets
 Supported dynamic data sets created by clients
 Supported reporting function with buffered and unbuffered
Report Control Blocks
 Supported control model: direct with normal security
 Supported horizontal communication with GOOSE:
configurable GOOSE publisher data sets, configurable
filters for GOOSE subscriber inputs, GOOSE inputs
available in the application logic matrix
Additional information can be obtained from the separate
documents ―IEC 61850 conformance statement.pdf‖, ―IEC
61850 Protocol data.pdf‖ and ―Configuration of IEC 61850
interface.pdf‖ on our website.