VAMP 259 - Page 35

Operation and configuration
2 Local panel user interface
2.4 Configuration and parameter
setting
VM259.EN007
VAMP 24h support phone +358 (0)20 753 3264
35
UNITS FOR MIMIC DISPLAY
 Unit for voltages (V). The choices are V (volt) or kV
(kilovolt).
 Scaling for active, reactive and apparent power [Power].
The choices are k for kW, kvar and kVA or M for MW, Mvar
and MVA.
DEVICE INFO
 Device type (Type VAMP 2XX)
 Serial number (SerN)
 Software version (PrgVer)
 Bootcode version (BootVer)
DATE/TIME SETUP
 Day, month and year (Date)
 Time of day (Time)
 Date format (Style). The choices are "yyyy-mm-dd",
"dd.nn.yyyy" and "mm/dd/yyyy".
CLOCK SYNCHRONISATION
 Digital input for minute sync pulse (SyncDI). If any digital
input is not used for synchronization, select "".
 Daylight saving time for NTP synchronization (DST).
 Detected source of synchronization (SyScr).
 Synchronization message counter (MsgCnt).
 Latest synchronization deviation (Dev).
The following parameters are visible only when the access level
is higher than "User".
 Offset, i.e. constant error, of the synchronization source
(SyOS).
 Auto adjust interval (AAIntv).
 Average drift direction (AvDrft): "Lead" or "lag".
 Average synchronization deviation (FilDev).