Vanderbilt SPCK520 User Manual

Single area view
6
Resetting a fault
17
Vanderbilt
Compact Keypad User Manual
I-200004-1
01.10.2015
 Following states are possible:
Symbol
Function
None
This open zone can be inhibited (forced set is possible).
This open zone can not be inhibited (no forced set possible). Please contact your
installer if symbol is still indicated after closing according zone (e.g. window).
Only available if the zone attribute Exit open is enabled.
The Entry – Exit zone is open. Zone will not prevent setting process. Zone has to be
closed at the end of the exit timer. If the zone is still open, setting will fail.
NOTICE
The system cannot be SET when there is a tamper active
The following Faults will also prevent setting of the system:
- External bell fuse
- Internal bell fuse
- Bell tamper
For a Grade 3 system, an engineer PIN is required to override the prevention of
setting.
If setting has been prevented at the end of the Extended Exit period, it will be
indicated with an audible alert on the keypad. A message will also be displayed
on the keypad.
Fob with low battery
The system can be set as normal if a user attempts to set the system with a
wireless fob that has a low battery. However, the following user alert is displayed
on the keypad when the system is unset:
Username
RF FOB LOW BATT
Subsequent setting of the system using the fob will be prevented until the alert is
cleared.
6.3 Resetting a fault
 If there is any fault, this will be displayed after login:

Vanderbilt SPCK520 Specifications

General

Brand	Vanderbilt
Model	SPCK520
Category	Keypad
Language	English