8.1.5.6 VISUAL INDICATORS
This option tests the LEDs and every pixel on the keypad display.
To test the LEDs and displays:
1. Scroll to VISUAL IND.
2. Press SELECT.
3. Select ENABLE.
All LEDs activate and every pixel in the display is tested for 12 seconds. The test
can be cancelled by pressing the Back button.
8.1.6 EVENT LOG
Recent events on the system are displayed in the EVENT LOG option. Events flash
in one second intervals.
1. Scroll to EVENT LOG and press SELECT.
2. To view an event from a particular date, enter the date with the numeric keys.
The most recent events are displayed on the bottom line of the display. All
previous events are displayed for one second in turn.
8.1.7 ACCESS LOG
Zone access on the system is displayed in the ACCESS LOG option.
1. Scroll to ACCESS LOG and press SELECT.
2. Select a door on the system for which you want to display access events.
The most recent access events are displayed with a date and time.
3. Scroll down through the access events or enter a date and press ENTER to
find a particular access event.
8.1.8 CHIME
The chime function can be enabled or disabled on all zones where the chime has
been programmed as an audible alert feature.
To enable or disable the chime function:
1. Scroll to CHIME and press SELECT.
2. Toggle between ENABLED and DISABLED for the chime.
8.1.9 USERS
Only users with the appropriate user right enabled in their profile have the ability to
add, edit, or delete users:
8.1.9.1 ADD
To add users to the system:
1. Scroll to USERS > ADD.
Select a user ID from the available IDs on the system and press SELECT.
To Next Page
Loading...
Need help?
General
