User programming via the keypad
Compact Keypad User Manual
XBUS FUSE FAULT (Expanders only)
X-BUS TAMPER
To view a list of the isolated zones, system alerts and X-BUS
devices alerts.
8.1.3 INHIBIT
Zone and alerts from devices can be manually inhibited from the keypad. Inhibiting
a zone removes that zone from the system for one alarm set period only.
To inhibit zones or alerts from devices:
1. Scroll to INHIBIT and press SELECT.
2. Scroll to the desired option in the table below and press SELECT:
Select the required zone and toggle the setting from NOT INHIBITED to
INHIBITED.
Select the required system alert and toggle the setting from DISABLED to
ENABLED to inhibit it.
MAINS FAULT
BATTERY FAULT
AUX FUSE FAULT
EXT FUSE FAULTINT FUSE FAULT
BELL TAMPER
AUX 1 TAMPER
AUX 2 TAMPER
ANTENNA TAMPER
MODEM 1 L FAULT
MODEM 2 L FAULT
XBUS CABLE FAULT
FAIL TO REPORT
PSU FAULT
Isolate the desired alert from EXPANDERS or KEYPADS:
COMMS LOST
FUSE FAULT (Expanders only)
TAMPER
To view a list of the inhibited zones, system alerts and X-BUS device alerts.
Only the ALARM, EXIT/ENTRY, FIRE EXIT and LINE zone types can be inhibited
on the system. All other zone types are not displayed in the inhibit menus.
If the security grade setting of the system is set to Unrestricted (see page), then
the option to inhibit zones and fault conditions is displayed in the Engineer Inhibit
menus.
8.1.4 SET DATE/TIME
The date and time can be manually entered on the system. The time and date
information is displayed on the keypad and browser and is used on time-related
programming features.
1. Scroll to SET DATE/TIME and press SELECT.