Compact Keypad User Manual
7.2 Clearing an alarm
If there is any alarm, the alarm will be displayed after login.
The alarm will be displayed by the blinking symbol and the blinking LED .
There is a fixed softkey assignment to set / partset / unset areas or area groups.
Due to this the location of the alarm icon can vary. In the graphics below, there is
an alarm in fullset condition.
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press the relevant softkey.
3. Scroll using the ▲ ▼ keys until the required area is visible.
4. Press the softkey below the blinking alarm symbol.
In the next screen, the alarm(s) will be listed.
To Next Page
Loading...
Need help?
General
