9.3 User PINs
The system supports 4, 5, 6, 7 or 8 PIN digits for each user, the translation of how
many logical combinations / variations can be found in the table below.
All User PINs are valid, hence for a 4 digit PIN the numbers can be from 0000
through to 9999 with any combination allowed in between.
Note: To comply with INCERT approvals, the user’s PIN code must contain more
than 4 digits.
9.4 Prioritization of display messages
Prioritization of display messages
Trouble messages and alerts are displayed on the keypad in the following order:
Zone
– Alarms
– Tamper
– Trouble
Area Alerts
– Fail to set
– Entry time out
– Code tamper
System Alerts
– Mains
– Battery
– PSU fault
– Aux fault
– External bell fuse
– Internal bell fuse
– Bell tamper
– Cabinet tamper
– Aux tamper 1
– Aux tamper 2