Compact Keypad User Manual
There are 2 alarm symbols possible:
Alarm can not be cleared. Alarm condition still present (e.g. the zone which
caused the alarm is still open). Please contact your installer if symbol is still
indicated after closing according zone (e.g. window).
If the alarm can be cleared, press the key .
The alarm is cleared.
7.3 Resetting a fault
If there is any fault, this will be displayed after login.
The symbol
In the below pictures a system wide fault (e.g. X-Bus cable fault) is indicated. Due
to this the fault symbol is displayed behind all area groups / areas. It is sufficient
to restore the fault once. In this case it does not matter which area group / area is
selected.
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press OK.
To Next Page
Loading...
Need help?
General
