Compact Keypad User Manual
is blinking.
1. Press the softkey below the blinking fault symbol.
The location of the different setting softkeys is fixed. Due to this the location of the
fault icon can vary. In the above picture, there is a fault in unset condition.
2. In the next screen, the fault(s) will be listed.
3. Use the up and down arrow keys to scroll through the lists of faults.
4. Highlight the required fault.
There are 2 fault symbols to indicate possible actions:
Fault can not be restored. Fault condition still present. Please contact your installer.
If the fault can be restored, press the softkey below the symbol .
The fault is restored.
Ready will be shown on the display.
6.4 Restoring an alarm
If there is any alarm, the alarm will be displayed after login.
To Next Page
Loading...
Need help?
General
