Compact Keypad User Manual
The alarm will be displayed by the blinking symbol and the blinking LED .
Press the softkey below the blinking alarm symbol.
The location of the different setting softkeys is fixed. Due to this the location of the
alarm icon can vary. In the above picture, there is an alarm in fullset condition.
In the next screen, the alarm(s) will be listed.
There are 2 alarm symbols possible:
Alarm can not be restored. Alarm condition still present (e.g. the zone which caused the alarm is
still open). Please contact your installer if symbol is still indicated after closing according zone
(e.g. window).
If the alarm can be restored, press the softkey below the symbol .
The alarm is restored.
To Next Page
Loading...
