Compact Keypad User Manual
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press OK.
All areas of this area groups are visible.
1. Scroll using the ▲ ▼ keys until the required area is visible.
2. Press the softkey below the setting symbol.
In the next screen, the information about that zone will be shown.
Following states are possible:
This open zone can be inhibited (forced set is possible).
This open zone cannot be inhibited (no forced set possible). Please contact your
installer if symbol is still indicated after closing according zone (e.g. window).
Only available if the zone attribute Exit open is enabled.
The Entry – Exit zone is open. Zone will not prevent setting process. Zone has to be
closed at the end of the exit timer. If the zone is still open, setting will fail.
To Next Page
Loading...
Need help?
General
