Vatech PaX-i Plus User Manual

5. Installing the Equipment: Wall Mount
PaX-i Plus / Insight Installation Manual 67
Drilling the Floor
1. Remove the align plate.
2. Drill the floor holes (size: 10.5 x 30 mm) by using the concrete hammer drill.
3. Remove the debris and clean the holes with the dust pump.
4. Put the Ficher strong anchor bolts into the holes and attach them with the hammer.
Verify that the Ficher strong anchor s are secured.
Ficher strong
anchor
M10 x 40
(Part No. 34)
Hammer Drill
L = 200 mm
(7.9”)

Vatech PaX-i Plus Specifications

General

Brand	Vatech
Model	PaX-i Plus
Category	Dental equipment
Language	English