© by N&W GLOBAL VENDING S.p.A. 11 02-2014 4535 00
Every time you switch on the machine, it performs initial
checks delivering hot water and steam from the nozzles.
-
-
gent) if it has not been done in the last 24 hours.
A screen appears showing the heating status of the boil-
ers.
The selections are not available until the machine has
reached operating temperatures.
Upon reaching the operating temperature a white screen
is displayed with the icons and the invitation to select a
beverage.
DATE TIME
SELECT A DRINK
WASH CYCLES
The machine is designed to run wash cycles of the cap-
puccino maker (if any) and infuser unit.
To access the wash functions it is necessary to access
the "washes" menu; refer to the "Service Functions"
paragraph
which can be a source of injury to people.
Do not put your hands under the nozzle during the
wash cycles.
The wash cycles do not replace the need to disas-
semble the components for regular sanitization.
For machines that do not have a drainage system for the
liquid residue container, for the wash cycles it is recom-
mended to place a container under the nozzle with a
capacity of at least 3 liters
MILKER RINSE
Only models with cappuccino maker
After 15 minutes without delivering the milk, the machine
automatically performs a rinse cycle of the milker nozzle.
To allow the user to remove the cups from the dispens-
ing area and avoid the risk of personal injury, before the
rinse cycle starts, the machine shows a message saying
the rinse will begin after the indicated time (30 seconds
countdown).
RINSE IN 30 SEC.
Rinsing the milker nozzle takes 1 minute and the device
displays an animation.
For the entire duration of the rinse cycle the selections
will remain disabled
The rinsing cycle does not replace the need to dis-
To Next Page
Loading...