EasyManua.ls Logo

VendCo KARISMA - Wash Functions; Service Suspension

VendCo KARISMA
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© by N&W GLOBAL VENDING S.p.A. 15 02-2014 4535 00
WASH FUNCTIONS
To access the menu "washes" touch the touchscreen
area with the "Please select the drink" message for 3
seconds
DATE TIME
SELECT A DRINK
The screen to access the menu is displayed; touch the
"washes" icon.
USB WASHES
MANAGER TECHNICAL
You will be prompted to enter your password (if required)
From the washes menu you can:
- wash the infuser unit and the mixer using specific deter-
gent
- wash the cappuccino maker with using specific deter-
gent.
- rinse mixer and infuser unit with hot water
- rinse the milker nozzle with hot water
TOUCHSCREEN CLEANING
The touch screen is touch sensitive; the reduction of
sensitivity and/or changes in the operation are caused
by the dirt accumulated on the touchscreen.

use of abrasive products containing solvents or
alcohol.
- Before cleaning the touchscreen, hold down the area
with the "Please select the drink" message for 3 sec-
onds.
- Press the "Washes" button, input the password
(if required) and press "Touchscreen cleaning".
On the touchscreen the remaining time to clean the
touchscreen (30 sec.) is displayed
- Clean the touchscreen with a little pressure
SERVICE SUSPENSION
If, for any reason, the machine remains o for a long
period, it is necessary to:
- completely empty the containers and wash them care-
fully with the sterilising products
- completely empty the grinders by dispensing coffee
until the notification that the machine is empty.
- Only in models with water supply from tank, completely
empty the tank and proceed to its sanitation
- proceed with the guided wash of the milk circuit (only
models with cappuccino maker), the infuser unit and
mixers.
- empty ad wash the solid residue container (if present)
and the liquid residue container
- close the tap positioned upstream of the water hose
and completely empty the hydraulic circuit
- disconnect the machine from the power supply.

Table of Contents