VER-MAC V-Touch TLD User Manual

Security and Login We value your opinion
Ver-Mac 2018 V-Touch TLD User's Manual – V3.2 6
2.2 Log In
Figure 1: Select Security Level screen
1. Power ON the unit and wait for the start-up sequence to finish.
2. Tap Viewer or Admin button according to your personal security level.
3. Type your numerical password and confirm it (green checkbox).
If you enter the wrong password, the error message “Invalid password” displays and
you return to the Select Security Level screen, where you start over.
Admin users can change their password only after initial login.
NOTE
1. The factory-set default password for the admin account is nine
(9).
2. All image examples in this manual are for a shuttle intersection.

VER-MAC V-Touch TLD Specifications

General

Brand	VER-MAC
Model	V-Touch TLD
Category	Controller
Language	English