Parameters
Ver-Mac 2018 V-Touch Controller for TLDs User Manual – V3.2 40
8 Parameters
8.1 Explore the Parameters Screen
Figure 16: Parameters screen
The Parameters screen provides admin users access to certain settings that can affect
their operations.
8.2 What You See
Change Password is where users set a personalized password.
Comm parameters gives access to the communications settings for the system.
Clock allows you to configure the system clock.
Language sets the language of the system interface.
Hardware Changes detects any changes (new, old, faulty) to the hardware on the sign.
Alert Email, if configured, sends errors that caused the signalization at an intersection to go
into Default mode.
Radio Diagnostics lets you change channel and see parameters.
Reset factory defaults lets you set your controller back to what it was when it came out of
the factory.
Table 6: Parameters buttons
To Next Page
Loading...
