Parameters
Ver-Mac 2018 V-Touch Controller for TLDs User Manual – 3.2 45
8.6 Interface Language Selector
Language Selector menu is where all users can change the language of the interface.
For the language change to take effect, you must power OFF and then power ON the
V-Touch Controller again after you have changed the Language setting.
Figure 22: Language Selector screen
1. Tap Language.
2. Select the language (English, Français, Espagñol) that you require.
3. Power OFF the V-Touch Controller, wait a few seconds, then power ON the
touchscreen and log in again.
To Next Page
Loading...
