Parameters
Ver-Mac 2018 V-Touch Controller for TLDs User Manual – V3.2 42
8.4 Communication Parameters
TLD units can be connected either serially or through a network. This option is only
available for Admin Users.
Figure 19: Communication Parameters screen with Network
1. Select the communication type (Serial or Network)
2. Tap DHCP or Static, according to the type of setting you want to access.
3. Tap EDIT beside each of the setting(s) you want to change; enter the changes
and confirm.
4. Apply the changes to the network settings.
5. Select any Operations button to access other functions.
To Next Page
Loading...
Need help?
General
