VER-MAC V-Touch TLD User Manual

Signalization We value your opinion
Ver-Mac 2018 V-Touch TLD User's Manual – V3.2 12
4.2 Stop the Current Signal Plan (Cycle)
When you stop the current signal plan (cycle) the current interval runs its course and
then the signal plan is replaced by the pre-determined default mode (e.g. flashing red)
on all TLD units that control the intersection.
In default mode the duration of the current and next intervals in the preview area
indicates Infinite.
• To turn off the signal plan currently running at the intersection, tap Stop on
Home screen and wait for the change to Default mode once the Current interval
runs its course.

VER-MAC V-Touch TLD Specifications

General

Brand	VER-MAC
Model	V-Touch TLD
Category	Controller
Language	English