Home Screen We value your opinion
Ver-Mac 2018 V-Touch TLD User's Manual – V3.2 8
Next Phase shows:
o the next interval time duration,
o the type of phase and next interval’s position in the signal plan
(cycle),
o the position of the next interval in its associated phase.
• Three QuickAlarm selection buttons to manually interrupt and terminate the
current signal plan and put the intersection signalization into default mode.
• A manual control button, with 2 phases or less.
• Operating Status errors (if any) in red.
Explanations of possible status errors are contained in the Troubleshooting
chapter of this manual.
Operation Buttons on Home Screen
Displays the Home screen.
Gives access to Play timing plan screen.
Stop the current timing plan.
Gives access to Edit Signal Plan functions.
Toggles to display the rest of the operations buttons
(Options and Parameters).
Log out from all operations.
Gives access to Options menu.
Gives access to Parameters menu.
Table 1 - Operation buttons
To Next Page
Loading...
Need help?
General
