VER-MAC V-Touch TLD User Manual

Options We value your opinion
Ver-Mac 2018 V-Touch TLD User's Manual – V3.2 29
Figure 19: Code Group
5. Verify the plan is the one expected and press Accept to make it start.
6. Walk up to the next unit and tap the Play button and enter the corresponding
code profile. The numbering is clockwise from the start unit.
7. Enter the codes and tap Accept. Units know when to change the lights because they
are programmed with the GPS signal as a reference.

VER-MAC V-Touch TLD Specifications

General

Brand	VER-MAC
Model	V-Touch TLD
Category	Controller
Language	English